Directory Results
Document Results
Documents
FEA 201 - Tinplate aerosol containers - Dimensions of the 25.4 mm opening
Replaced by EN 14847
FEA 202 - Metal Containers Dimensions of Valve Cups
Replaced by EN14848
FEA 203 - Aluminium Cans - Dimensions of 25.4mm opening
Replaced by EN15006
FEA 204 - Aluminium aerosol containers – Tolerances of the fundamental dimensions in connection with the clinch
Replaced by EN15010
FEA 206 - Glass aerosol containers – Dimensions of the neck
Replaced by EN14854
FEA 210 - Glass aerosol containers – Dimensions of aerosol valve ferrules
Replaced by EN14849
FEA 214 - Tinplate aerosol containers - Dimensions of two and three-piece containers
Replaced by EN15007
FEA 215 - Aluminium aerosol containers - Dimensions of 20 mm opening in monobloc containers
The objective is to standardise on only one shoulder profile which is the most commonly used. This standard applies to Monobloc aluminium containers using a 20 mm opening. The most common shoulder used for this kind of containers is ogival, but others are possible like flat shoulder.
FEA 216 - Metal Aerosol Container - Dimensions of the bearing surfaces of clinching jaws
This standard solely covers the form of the bearing surfaces of the clinching jaws and their diameter in closed and open (expanded) condition.
FEA 219 - Aluminium aerosol containers – Dimensions of monobloc containers with 20 mm openings
This standard specifies the dimensions of monobloc aluminium containers with 20 mm opening with their respective nominal brimful capacities.
FEA 222 - Metal Aerosols - Guidelines for achieving optimum clinch conditions for containers with 25.4 mm opening
The clinch dimensions are critical to obtaining tightly sealed containers. Some gas loss over a long period of time is inevitable but may however not exceed the established annual amount. Gas leakage through the valve’s internal sealing gasket, or side seam of containers is not discussed here.
FEA 224 - Compartmented filled aerosol packs - Product volume and nominal capacity of the outer container
Replaced by EN15009
FEA 225 - Dimensions of rimmed aluminium aerosol containers
This standard defines key dimensions of aluminium aerosol container with rimmed flat shoulder. These aluminium aerosol containers are also known as ‘transfer cans’.
FEA 226 - Plastic aerosol containers - Guidelines for achieving optimum external crimp conditions
This standard provides guidance for achieving optimum external crimp conditions in gathering data and operations to be carried out during crimping.